Usage:
12H ES2GSFind Caterpillar 12H Motor Grader for Sale. 2010 CATERPILLAR 140M VHP Plus Motor Grader. 8019 LOS ANGELES, CA. 2002 CATERPILLAR 140H VHP Motor Grader. Caterpillar 988H Manual PDF.pdf: 1.8Mb: Download. CATERPILLAR 836H. CATERPILLAR Motor Graders. CATERPILLAR 120K. CATERPILLAR 12M (2) CATERPILLAR 120K CATERPILLAR 12K. Caterpillar 12h 140h 160h grader factory workshop manual c2010 $200 Genuine Factory Service Manual for Caterpillar 12H, 140H and 160H Diss and Assemble c2010, very gooy good clean condition, all section intact, can arrange delivery. Operators Manual (OPT) - The operators manual (a.k.a. Owners manual) is the book that came OEM from the manufacturer when the Caterpillar 12 Grader was purchased. It gives the owner/operator instructions, shift patterns, capacities (anti freeze, crankcase, oil, hydraulic, etc.).
| Illustration 1 | g00689096 |
The Electronic Monitoring System (EMS) is located on the front dash in the operator compartment. The EMS consists of an action alarm, action light (1), and monitoring panel (2). The monitoring panel includes an individual alert indicator for each machine system that is listed on the monitoring panel.
The EMS is designed to alert the operator to an immediate problem with any of the machine systems that are monitored. The EMS is also designed to alert the operator to an impending problem with any of the machine systems that are monitored. The action light and the individual alert indicators will light when a problem occurs.
EMS Functional Test
To ensure the proper operation of the EMS, check the system daily.
The battery disconnect switch must be in the ON position in order to supply electrical power to the machine.
| Illustration 2 | g00717994 |
When you turn engine start switch (3) to the ON position, electrical power is supplied to the systems in the operator compartment.
| Illustration 3 | g00689029 |
| Panel Test Switch (4) - While the engine is not running, push up on the panel test switch in order to test the EMS. All alert indicators should come on and the action light should blink until panel test switch (1) is released. The panel test switch will return to the OFF position when the panel test switch is released. |
If the alert indicators or action light (1) do not come on, the electrical system must be checked. Perform all necessary repairs before you start the engine.
If all of the alert indicators and action light (1) come on, start the engine. Repeat the panel test with the engine running. Move panel test switch (4) to the ON position. All alert indicators and action light (1) should come on again. The action alarm should also sound.
If any of the alert indicators or the action light do not come on or action alarm (1) does not sound, stop the engine. Check the electrical system and the machine system. Perform all necessary repairs before you start the engine.
Warning Categories
The Electronic Monitoring System (EMS) provides three warning categories. The first warning category requires only operator awareness. The second warning category requires an operator response. The third warning category requires immediate shutdown of the machine systems.
Warning Category 1
In this category, only the alert indicator comes on. This category alerts the operator that the machine system needs attention. Failure of these systems will not endanger the operator. Failure of these systems will not cause serious damage to the machine components.
| Illustration 4 | g00689016 |
| Parking Brake (5) - This alert indicator shows that the parking brake is engaged and that the transmission is in the NEUTRAL position. The alert indicator should come on during engine start-up. The alert indicator should go out when the parking brake is disengaged. |
| Alternator (6) - This alert indicator shows that the alternator is malfunctioning. If this alert indicator comes on, stop the machine at a convenient location. Investigate the cause of the problem. The cause of the problem could be a loose belt, a broken belt, etc. Do not operate the machine until the cause of the problem has been corrected. |
Warning Category 2
In this category, the alert indicator and the action light come on. This category requires a change in machine operation in order to reduce excessive temperature in one of the machine systems or more.
| Illustration 5 | g00689018 |
| Coolant Temperature (7) - This alert indicator shows excessive coolant temperature. If this alert indicator comes on, reduce the operating speed of the machine. Keep the engine at low idle until the engine is cooled down. If the alert indicator should stay on for several minutes after running the engine at low idle, stop the engine. Investigate the cause of the problem. |
Do not operate the machine if the alert indicator stays on and the action light flashes. Make any necessary repairs.
| Transmission Electrical System (8) - This alert indicator shows an electrical fault in the transmission electrical system. Stop the machine at a convenient location if the indicator stays on. Investigate the cause of the problem. Do not operate the machine if the alert indicator stays on and the action light flashes. |
| Hydraulic Oil Temperature (9) - This alert indicator shows excessive hydraulic oil temperature. If this alert indicator comes on, reduce the load on the hydraulic system. Stop the machine at a convenient location if the alert indicator stays on. Investigate the cause of the problem. Do not operate the machine if the alert indicator stays on and the action light flashes. |
Warning Category 3
In this category, the alert indicator and the action light come on and the action alarm sounds. This category requires immediate shutdown of the machine in order to prevent injury to the operator and/or severe damage to the machine.
| Illustration 6 | g00689019 |
| Primary Steering (10) - This alert indicator shows that the primary steering has failed and that the secondary steering is being used. If this alert indicator comes on during operation, steer the machine to a safe location and stop the machine. Stop the engine and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected. |
| Engine Oil Pressure (11) - This alert indicator shows low engine oil pressure. If this alert indicator comes on, stop the machine immediately. Stop the engine and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected. |
| Brake Air Pressure (12) - This alert indicator shows low brake air pressure. If this alert indicator comes on, stop the machine immediately. Stop the engine and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected. |
Cached
| Illustration 7 | g00689020 |
| Parking Brake (13) - This alert indicator notifies the operator that the parking brake is engaged. Stop the machine immediately if all of the following conditions occur: |
- The alert indicator turns on.
- The action light turns on.
- The action alarm sounds.
Engage the parking brake and stop the engine. Investigate the cause of the problem.
Do not operate the machine until the cause of the problem has been corrected.
If the parking brake is engaged and the transmission is engaged during engine start-up, the following conditions will occur:
- The alert indicator will come on.
- The action light will flash.
- The action alarm will sound.
Cat 12h Grader Parts Manual Pdf
Shift the transmission direction and speed control to the NEUTRAL position in order to turn off the action alarm.